Lovely Fasteners (A Brand Of Shree Krishna Engg Co)

LOVELY Mild Steel D-Hook Hanger is available without or with Fasteners.
Lovely D-Hook Set consists of 1 Pc. of D-Hook & 2 pcs.of heavy duty Fasteners (M10x75mm)
Specially designed to hang Ceiling Fans, Jhoomer, Baby Swings, Ropes, etc.
Best for home & Industrial Use.
Safe load: Pull out load is 75 Kgs and Jurk/Vibration load is 40 Kgs
The distance between 2 holes is 68 MM, Approx 2.5 Inch.

• Highest Loading Capacity in its Class
• With Forged Heavy Duty Nut
• Ideal for Industrial/Commercial Construction Site Purpose
• Ideal use for fitting in Concrete
• Tested in Govt. Approved Labs

• Rawl Bolt (With Eyelet, Hook) bolt consists of 3 malleable iron expansion segments and a nut held together by a special ring and a Eyelet.
• Secure fastening in concrete and rock.
• LRBH can be used for hanging and fixing in ceiling etc.
• With Forged-Heavy Duty Nut.
• Tested in Govt. approved labs.

Nail In Anchor / CH Fastener (Clamp Head) PATENT No.226090

Nail In Anchor / Clamp Head Fastener is a product of our R & D, which earned us a PATENT for this product. This Heavy Duty Anchor Fastener is made from special alloy steel for permanent fixtures. White zinc plated to provide additional corrosion protection. It is particularly designed for permanent and quick fixture installation of Windows, Door Frames, Shutters, Road Barriers, Angles, etc. in Concrete, Masonry other hard construction. Available sizes are listed below.

Product Code with Sizes:
LCH 1201 - 6 x 40
LCH 1202 - 6 x 50
LCH 1203 - 8 x 50
LCH 1204 - 8 x 60
LCH 1205 - 8 x 75
LCH 1206 - 8 x 100
LCH 1207 - 10 x 65
LCH 1208 - 10 x 75
LCH 1209 - 10 x 100
LCH 1210 - 10 x 100 (SS 304)
LCH 1211 - 10 x 125
LCH 1212 - 12 x 100
LCH 1213 - 12 x 125
LCH 1214 - 12 x 150

• With SS Clip
• Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions
• Material composition: Steel, Zinc-plated
• Externally Threaded
• Pre-Fastening, Through-Fastening
• High-performance stud anchor with optimised expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete
• Raised impact section prevents thread damage during installation

• Structural Steel
• Mechanical equipment
• Pipe supports
• Racks
• Facades
• Foundations
• Others

LOVELY Plastic Bolt Cap can be used on every type of bolt & Nut ranging from size 6mm to 12mm. It is used to cover the face of bolt / nut.

Looks elegant in Interiors, while bolt nut seems ugly. It saves bolt head from corrosion & other atmospheric effects. Used heavily by interior designers for covering purpose.

This 2 piece set comes in White Color. Pack of 100 Pcs.

Code No. & Size mm

• LPBC 211 - 6mm
• LPBC 212 - 8mm
• LPBC 213 - 10mm
• LPBC 214 - 12mm

Wedge Expansion Bolt Type Fastener is made in 2 models:

IN MILD STEEL: This model is made from Mild Steel. This versatile type can be used for fixing in Railings, Shutters, Elevators, Angles, Fire Fighting / Plumbing Clamps, Heavy Duty Pipes, Sanitary Works, A/c Ducts, Cable Trays, Threaded Rods and other solid and heavy situations. LWB can be installed in Hard Concrete, Masonry as well as in soft media.

Lovely presents Wash basin rack bolt screw. This product is made of Mild Steel. It can be used for wash basins to hang it on the wall. You are assured of greater longevity and high tensile strength

• Specially Made For All Types Of Wall Hung / Wall Mount Toilet Commode Stand.
• Comes With Full Set of White Metal Cap & Pvc Jointer.
• Easy Installation and It can Fix After Tile Fixing.
• This bolt is used to hang wash basins into the wall.

- Available in Carbon Steel and SS-304 variants.
- To be used with Chemical provided with the Anchor (Charges extra).

Usage:

• Concrete (cracked)
• Concrete (uncracked)
• Masonry (solid)

Special Features:

• A Chisel tip to cut and mix the chemical.
• Embedment marking for easy setting of Anchor Stud.
• Round/Square/Hex Head to be used with Spanner for firm fixing of Anchor.

Ideal for the push through anchoring of all types of machinery and equipment to concrete, cement, and floor:

• Automatic grip guarantee

• Speedy installation

• Small drill hole no larger than thread and bolt diameter

• Zinc plated and passivated for corrosion resistance

• A complete fixing, ready to use.

• L Hook Fastener.
• Secure fastening in brick, concrete and rock.
• LLH can be used for hanging and fixing in the ceiling etc.
• With Heavy-Duty Hex Nut.
• Quality Tested in Govt. approved labs.

Ultimate Performance Expansion Anchor for Cracked / Un-Cracked Concrete.

Features

Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions

Material composition: EN1A Steel, Zinc-plated

Externally Threaded

Pre-Fastening, Through-Fastening

Raised impact section prevents thread damage during installation

Applications

Structural Steel

Mechanical equipment

Pipe supports

Racks

Facades

Foundations

Others

We manufacture a broad range of Zebra Fastener. Widely used as per the application requirements in different industries.
Made using quality metal and alloy, these bolts ensure durability and high performance. We manufacture these bolts in various sizes and shapes.

Product Code with Sizes:
LZA 1601 - 6 x 40
LZA 1602 - 6 x 50
LZA 1603 - 6 x 60
LZA 1604 - 6 x 80
LZA 1605 - 8 x 50
LZA 1606 - 8 x 60
LZA 1607 - 8 x 75
LZA 1608 - 8 x 100
LZA 1609 - 10 x 50
LZA 1610 - 10 x 60
LZA 1611 - 10 x 75
LZA 1612 - 10 x 100
LZA 1613 - 10 x 125
LZA 1614 - 10 x 150
LZA 1615 - 12 x 75
LZA 1616 - 12 x 100
LZA 1617 - 12 x 125
LZA 1618 - 12 x 150
LZA 1619 - 12 x 200
LZA 1620 - 16 x 75
LZA 1621 - 16 x 100
LZA 1622 - 16 x 125
LZA 1623 - 16 x 150
LZA 1624 - 16 x 200
LZA 1625 - 16 x 250
LZA 1626 - 16 x 300
LZA 1627 - 20 x 100
LZA 1628 - 20 x 125
LZA 1629 - 20 x 150
LZA 1630 - 20 x 200
LZA 1631 - 20 x 250
LZA 1632 - 20 x 300
LZA 1633 - 24 x 175
LZA 1634 - 24 x 200
LZA 1635 - 24 x 250
LZA 1636 - 24 x 300

(Except above Sizes, Other Sizes Can Also Be Manufactured)

• Secure fastening in concrete and rock. LPB can be used for foundation purpose, etc.
• For installation of Steel structure, Heavy plant, Heavy Machinery.
• Tested in Govt. approved labs.
• Ideal for Industrial/Commercial Construction Site Purpose
• Highest Loading Capacity in its Class
• Ideal use for fitting in Concrete
• Largely used for Foundation Purpose
• Tested in Govt. Approved Labs